Our Calibration Services

Trilab conducts calibration services for a range of laboratory testing equipment and metrology instruments. This includes both on-site and off-site calibration.

Contact our team to discuss your calibration needs.

equipment calibration services Australia

Request Calibration

Send your equipment to Trilab or contact us to arrange onsite calibration. After calibration, we will provide a report of the results along with the errors found.

What is Instrument Calibration?

Calibration is the process of comparing a measuring instrument against a known reference standard to adjust its precision and accuracy, ensuring consistent and accurate readings within a specified tolerance for both laboratory and site testing equipment.

Trilab’s Calibration Scope for Laboratory and Site Equipment

All instruments that require calibration have a different set of standards, and it takes specific knowledge. Therefore, it is essential instruments are calibrated by industry experts. Trilab is an ISO 17025-accredited lab that meets these requirements.

For more information visit the Trilab NATA Scope of Accreditation page.

Calibration of Equipment Types

Trilab performs calibration services for the following:

Scroll right to see the other columns >>

Precision lab balances and Industrial weighing devices E.C. Morris & K.M.K Fen to 60 kg
Extensometers Compliance to AS 1545
Test sieves AS 1152(1993), ISO 3310-1, ISO 3310-2 and ASTM E11
Wire woven and perforated plate sieves Compliance to AS 1152(1993), ISO 3310-1, ISO 3310-2 and ASTM E11 (minimum aperture 32 μm)
Vernier calipers Compliance to JIS B 7507
Falling weight deflectometer Compliance to TP-BF-StB-Part-B 8.4
Pressure gauges & transducers MSA Test Method 1 in the range of 50 kPa to 60 MPa
Rubber bases (hardness) Compliance to AS 1289.3.1.1
Force measuring devices including

  • Universal testing machines
  • Compression machines
  • Concrete testing machines
  • Hydraulic rams and jacks
  • Load cells
  • Proving rings
Compliance to AS 2193 up to 3000kN in compression 100kN in tension


Trilab adheres to the testing methods defined by the Australian standards, ASTM international and other accreditations including the following:

ISO 17025


Trilab is proud to be a member of the following organisations: